Compression Sprayer designed for applying TAGINATOR & TAGAWAY liquid graffiti removal products. A graffiti removal product such as TAGINATOR requires an applicator that can withstand the chemical combinations it contains. ETS Co. has designed a sprayer specifically for use with TAGINATOR. This high-impact-resistant, two-gallon poly tank has a rebuildable steel and poly pump assembly. The compression cup is TAGINATOR compatible. All parts in the unit are available for replacement.
- Chemical Compatibility: You benefit from a sprayer specifically built with seals and gaskets that withstand the potent chemistry of professional restoration formulas.
- Precision Application: This tool allows you to apply the product exactly where needed, reducing waste and ensuring even coverage across vandalized areas.
- Industrial Durability: You gain a rugged, 2-gallon pump-up unit designed for the daily rigors of field use by contractors and public works crews.
The TagSprayer offered by ETS Company is the essential partner for your restoration arsenal. While your cold pressure washer handles the final rinse, this specialized applicator ensures the chemical phase of the job is done right. Even if you own the best pressure washer on the market, you cannot achieve professional results without a way to apply thick removers consistently. This unit bridges the gap between manual scrubbing and high-powered rinsing, functioning as the perfect precursor to your graffiti pressure washer workflow. It is designed to deliver a controlled spray pattern that won't atomize or drift, keeping the chemical on the target surface rather than in the air. Order today.
- Maximize Taginator: Why invest in this? It allows you to "drape" the thick Taginator formula over brick pores, ensuring the deep penetration required for masonry.
- Optimize Tagaway: You ensure a fine, even mist on smooth surfaces like lockers or signs, preventing the product from running off before it can dissolve the paint.
- Efficiency Gains: Investing in this dedicated applicator prevents cross-contamination and ensures your TAGINATOR and TAGAWAY products perform at their highest theoretical efficiency.
Why buy a TAGSPAYER?
Almost all pump-up sprayers known as Garden sprayers or Bugsprayers or even “Chemical Resistant” Compression Sprayers are made usingrubber parts and hoses made of what’s called Buna Rubber or Viton Rubber.
In this picture you can see what happens to these O-ringswhen TAGINATOR is used through Compression Pump-up sprayers made with Buna orViton Rubber parts, hoses, O-rings and seals.
As you can see the rubber parts swell up and expand two,three or more times their original size. Sometimes the rubber parts break downand completely disintegrate.
This is not safe as the sprayers hose or seals may blow outwhile under pressure and spraying the user with TAGINATOR on their clothing ormaybe even into their eyes. Certainly not good!
Hopefully no one get hurt using the wrong sprayer butadditionally you may also be stuck in the middle of a job without a workingsprayer. Not good either!
The bottom line is a TAGSPRAYER is about twice the cost of amost decent Pump-Up Compression Sprayers. And using the wrong sprayer willquickly ruin your sprayer and you will need to buy another.
So, now you have spent a lot money on two broken sprayersand still don’t have one that works. The answer is to “Buy the Right Tool for thejob…get a TAGSPAYER!”
Last mention is, only use your TAGSPRAYER for applyingTAGINATOR! When you are done removing graffiti with your TAGPRAYER, give it aquick water rinse and put it away until the next graffiti removal job.
If you have more question give us a call.
![]()
