spray the TAGINATOR graffiti removal product onto the spray paint,
(using or special TAGSPRAYER™ for Taginator) allow it to soak in for 5
to 15 minutes then rinse with a power washer. That’s it! You’re DONE!
No difficult operations at all.
No training required.
No damage done.
Removes 200 to 300 square feet of graffiti per gallon. Removes 2 to 3
times more graffiti than all other thickened and brushed on products.
1. Spray TAGINATOR® graffiti remover onto graffiti using TAGSPRAYER™.
2. Let TAGINATOR® graffiti remover soak into masonry for 5 – 20 minutes.
3. High pressure rinse away
Works in all climates (hot & cold) and surfaces (wet & dry)!
Here are some quick videos on the above steps on how to use Taginator to remove your graffiti correctly
Applying Taginator with 32 ounce Spray bottle
Applying Taginator with TagSprayer
Allowing Taginator to work... "The Dwell Time"
Power Washing Rinse Step for removing graffiti with Taginator
What’s a TAGSPRAYER?
TAGINATOR® requires an applicator
compatible with the ingredients it contains. ETS Co. has designed such a
sprayer specifically for use with TAGINATOR®. This high impact
resistant, two gallon poly tank has a rugged hose, durable valve,
chrome steel pipe wand, non-atomizing nozzle and poly pump assembly. A
TAGSPRAYER is about twice the cost of a sprayer you may already own or
may go buy. You will ruin your sprayer, buy another and still not have
the right sprayer. All parts are available so you won’t throw it away.
It’s not rocket science but it is the Right tool for the job!